金币
UID1294
帖子
主题
积分56733
注册时间2011-8-1
最后登录1970-1-1
听众
性别保密
|
发表于 2013-5-11 12:44:06
|
显示全部楼层
Grade C and D: Clean areas for carrying out less critical stages in the manufacture of sterile products.
Grade C and D: Clean areas for carrying out less critical stages in the manufacture of sterile products.
The monitoring of Grade C and D areas in operation should be performed in accordance with the principles of quality risk management. The requirements and alert/action limits will depend on the nature of the operations carried out, but the recommended “clean up period” should be attained.
D reparation of solutions and components for subsequent filling
Terminally sterilised products 28. Preparation of components and most products should be done in at least a grade D environment in order to give low risk of microbial and particulate contamination, suitable for filtration and sterilisation. Where the product is at a high or unusual risk of microbial contamination, (for example, because the product actively supports microbial growth or must be held for a long period before sterilisation or is necessarily processed not mainly in closed vessels), then preparation should be carried out in a grade C environment. 29. Filling of products for terminal sterilisation should be carried out in at least a grade C environment. 30. Where the product is at unusual risk of contamination from the environment, for example because the filling operation is slow or the containers are wide-necked or are necessarily exposed for more than a few seconds before sealing, the filling should be done in a grade A zone with at least a grade C background. Preparation and filling of ointments, creams, Terminally sterilised products 28. Preparation of components and most products should be done in at least a grade D environment in order to give low risk of microbial and particulate contamination, suitable for filtration and sterilisation. Where the product is at a high or unusual risk of microbial contamination, (for example, because the product actively supports microbial growth or must be held for a long period before sterilisation or is necessarily processed not mainly in closed vessels), then preparation should be carried out in a grade C environment. 29. Filling of products for terminal sterilisation should be carried out in at least a grade C environment. 30. Where the product is at unusual risk of contamination from the environment, for example because the filling operation is slow or the containers are wide-necked or are necessarily exposed for more than a few seconds before sealing, the filling should be done in a grade A zone with at least a grade C background. Preparation and filling of ointments, creams,
D:Handling of components after washing.
Aseptic preparation 31. Components after washing should be handled in at least a grade D environment. Handling of sterile starting materials and components, unless subjected to sterilisation or filtration through a micro-organism-retaining filter later in the process, should be done in a grade A environment with grade B background. 32. Preparation of solutions which are to be sterile filtered during the process should be done in a grade C environment; if not filtered, the preparation of materials and products should be done in a grade A environment with a grade B background. 33. Handling and filling of aseptically prepared products should be done in a grade A environment with a grade B background. 34. Prior to the completion of stoppering, transfer of partially closed containers, as used in freeze drying should be done either in a grade A environment with grade B background or in sealed transfer trays in a grade B environment. 35. Preparation and filling of sterile ointments, creams, suspensions and emulsions should be done in a grade A environment, with a grade B background, when the product is exposed and is not subsequently filtered.
这说明了什么，说明了欧盟给出的是原则。我们给出的是具体项目。存在疑问很正常，我们说的绝对哦了 |
|
[复制链接]
|手机版|蒲公英|ouryao|蒲公英
( 京ICP备14042168号-1 ) 增值电信业务经营许可证编号：京B2-20243455 互联网药品信息服务资格证书编号：(京)-非经营性-2024-0033
楼主
